ADIY
RS232 to TTL Serial Interface ModuleFIG. 01

Interface Modules

RS232 to TTL Serial Interface Module

RS232 to TTL Serial Interface Module RS232 to TTL Serial Interface Module by Adiy is a board with the MAX3232 transceiver integrated circuit (IC). It facilitates serial communication between TTL and RS232 ports by…

₹71₹80incl. GST · price as listed

In stock (as listed)

Overview

RS232 to TTL Serial Interface Module#

RS232 to TTL Serial Interface Module by Adiy is a board with the MAX3232 transceiver integrated circuit (IC). It facilitates serial communication between TTL and RS232 ports by providing the necessary electrical signal conversion. This board has a female DB9 connector soldered at one end and four header pins with jumper cables at the other end. The jumper cables enable the user to connect the wires to a breadboard or a microcontroller project board, whilst the female DB9 connects directly to a COM port of a computer

  • IC Chip: MAX3232
  • Operating Voltage: 3.3-5.5V
  • It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU
  • Pre-assembled compact-size board
  • Suitable for use with most microcontrollers
  • Operates up to 250 kbit/s

RS232 to TTL Serial Interface Module is a board with the MAX3232 transceiver integrated circuit (IC). It facilitates serial communication between TTL and RS232 ports by providing the necessary electrical signal conversion.

These boards usually have a female DB9 connector soldered at one end and four header pins with jumper cables at the other end. The jumper cables enable the user to connect the wires to a breadboard or a microcontroller project board, the female DB9 connects directly to a COM port of a computer.

The MAX3232CSE IC comes in a 16-pin narrow SO package. It requires between 3.0 V to 5.5 V to operate and has two receivers and two transmitters. It has a maximum guaranteed data rate of 120 kbps, and the circuitry requires four 0.1uF charge-pump support capacitors. It is also compatible with the famous MAX3232 IC pins. These boards connect to systems with a UART, they work with ATMEL and PIC microcontrollers.

MAX3232 RS232 Serial Port To TTL Converter Module female DB9 Connector 5V RS232 to TTL + Female Serial TTL + serial modules / Brush board. This module can be used to the serial port of the microcontroller module to expand DVD, router, hard drive and other equipment to upgrade.

Specifications: RS232 to TTL Serial Interface Module#

  • IC Chip: MAX3232
  • Operating Voltage (VDC): 3.3 ~ 5
  • Length(mm): 29
  • Width(mm): 32
  • Height(mm): 15
  • Weight(gm): 10
  • Shipment Weight: 0.016 kg
  • Shipment Dimensions: 7 × 5 × 2 cm

Features: RS232 to TTL Serial Interface Module#

  1. It is widely used in radio modification, phone flash, XBOX360 flash, GPS, vehicle detection, DVD flash, and hard disk repair set-top box upgrade.
  2. High-cost performance
  3. ±15-kV ESD Protection
  4. Low power consumption
  5. Two Drivers and Two Receivers
  6. It is widely used in radio modification,
  7. It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU
  8. Pre-assembled compact-size board
  9. Suitable for use with most microcontrollers
  10. Operates up to 250k bits
  11. Easy to use
  12. Stable, high-speed

Applications: RS232 to TTL Serial Interface Module#

  • Radio Modification
  • Program STC MCU, NXP MCU, STM32 MCU, etc.
  • Phone Flash
  • DVD Flash
  • Hand-held Equipment
  • Palmtop PCs

For more information on RS232 to TTL Serial Interface Module check the links below:

Package Includes

  • 1 x RS232 to TTL Serial Interface Module.

Features

  • It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU
  • Pre-assembled compact-size board
  • Suitable for use with most microcontrollers
  • Operates up to 250 kbit/s
  • It is widely used in radio modification, phone flash, XBOX360 flash, GPS, vehicle detection, DVD flash, and hard disk repair set-top box upgrade.
  • High-cost performance
  • ±15-kV ESD Protection
  • Low power consumption
  • Two Drivers and Two Receivers
  • It is widely used in radio modification,
  • Operates up to 250k bits
  • Easy to use
  • Stable, high-speed
  • Radio Modification
  • Program STC MCU, NXP MCU, STM32 MCU, etc.
  • Phone Flash
  • DVD Flash
  • Hand-held Equipment
  • Palmtop PCs
  • 1 x RS232 to TTL Serial Interface Module.

Technical specifications

Specifications for RS232 to TTL Serial Interface Module
IC ChipMAX3232
Operating Voltage3.3-5.5V
Operating Voltage (VDC)3.3 ~ 5
Length(mm)29
Width(mm)32
Height(mm)15
Weight(gm)10
Shipment Weight0.016 kg
Shipment Dimensions7 × 5 × 2 cm

Specifications are taken from the product listing. See the datasheet for full electrical details.

Datasheets & downloads

No datasheet is published for this product yet. Ask technical support for documentation.

  • ADIY 10K Potentiometer Module – view 1

    Interface Modules

    ADIY 10K Potentiometer Module

    An adjustable potentiometer, 10K Potentiometer Module can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the centre pin will have a…

    ₹48

    Datasheet
  • W5500 TCP / IP SPI to LAN Ethernet Interface SPI to LAN / Ethernet Converter

    Interface Modules

    ADIY W5500 TCP / IP SPI to LAN Ethernet Interface Converter

    W5500 TCP / IP SPI to LAN Ethernet Interface SPI to LAN / Ethernet Converter 80MHz high-speed SPI interface Built-in hardware TCPIP protocol stack Support up to 8 Socket connections Support TCP, UDP, ICMP, IPv4, ARP,…

    ₹466

    Datasheet
  • Relay Boards

    8 Channel Relay Board 12V

    8 Channel Relay Board 12V – This 8 Channel 12V Relay Module with Optocoupler meets the safety standard as control areas and load areas have the isolation groove. Optical coupling isolation module. The triggering of the…

    ₹301.89

  • ADIY 6 CHANNEL 12V RELAY BOARD – view 1

    Relay Boards

    ADIY 6 CHANNEL 12V RELAY BOARD

    12V Relay Module 6 Channel with Optocoupler by Adiy meets the safety standard as control areas and load areas have the isolation groove. Optical coupling isolation module. The advanced FR4 double circuit board features…

    ₹304

    Datasheet